top of page
Knife Care
Step 01
Cleaning
Always keep the blade dry. After use, wipe the blade clean with a soft, dry cloth. If it gets wet, dry it immediately to prevent rust on the high-carbon steel.
Step 02
Oiling
Apply a thin coat of mineral oil or WD-40 to the blade frequently, especially if not in use. This protects the carbon steel from moisture in the air.
Step 03
Sharpening
Use the Chakmak (small blunt knife) to hone the edge. For deep sharpening, a smooth stone or fine-grit sandpaper is recommended to maintain the traditional convex edge.

bottom of page